DAK IX 9

Caps, cap, capacitor, direct inject, bass, lows, hi fi, hifi, hi-fi, high fidelity, mod, mods, modification, upgrade, widen, wide audio, Goldfinger, Cobra, Galaxy, Ranger
Post Reply
User avatar
Goldfinger
Site Maintenance
Posts: 3849
Joined: Sat Jun 30, 2007 12:27 am
Location: Beaver State

DAK IX 9

Post by Goldfinger »

Receive:

Change C128 to a 2.2uF, 16 volt electrolytic (observe polarity)


Receive and transmit:

Change C211 to a 1uF Mylar/polyester or non-polar electrolytic. (50 volt or higher)
Change C234 to a 1uF or 2.2uF Mylar/polyester or non-polar electrolytic (50 volt or higher)
Change C226 to a 1000uF, 25 volt electrolytic (observe polarity)
Change C227 to a 470uF, 25 volt Electrolytic (observe polarity)


Transmit:

Change C706 to a 1uF, 100 volt or higher Mylar/polyester
More high's? make C203 lower in value

DAK 9, hi fi, hi-fi, hifi, lows, broadband, mod, mods
wwpdx
wwpdx.com

Image
Mr.Lightning
WWPDX MEMBER
Posts: 96
Joined: Mon Dec 09, 2013 8:34 pm

Re: DAK IX 9

Post by Mr.Lightning »

Would this be the same for the DAK X?
User avatar
Goldfinger
Site Maintenance
Posts: 3849
Joined: Sat Jun 30, 2007 12:27 am
Location: Beaver State

Re: DAK IX 9

Post by Goldfinger »

No, the DAK X has the sideband board in it.
wwpdx
wwpdx.com

Image
Mr.Lightning
WWPDX MEMBER
Posts: 96
Joined: Mon Dec 09, 2013 8:34 pm

Re: DAK IX 9

Post by Mr.Lightning »

Do you have the rx/tx cap changes for the X model?
Post Reply

Return to “rx and tx mods”